R430 Memory Slots
R430 Memory Slots 3,9/5 2643 votes
The Server has 12 Sockets to install memory, already with 8GB (Removable) standard memory installed. For best PowerEdge R430 Server performance use the maximum amount of 192GB / 384GB with Dual Processor, fill all the slots with the max allowed memory per slot for your Server. What is the warranty on these memory? The PowerEdge R430 has 12x DDR4 ECC memory slots (6x per processor) supporting DDR4 ECC 2133MHz and 2400MHz memory. Select up to 6x modules of matching memory per processor. Note that the Xeon E5-2600 processors have 4 memory channels per processor, thus we recommend selecting 4 memory modules per processor to occupy all memory channels for. Get access to helpful solutions, how-to guides, owners' manuals, and product specifications for your Notebook NP-R430 from Samsung US Support. One optional vFlash memory card NOTE: The card slot is available for use only if the iDRAC8 Enterprise license is installed on your system. Front: USB: Two 4-pin, USB 2.0-compliant: Video: 15-pin VGA: Internal: USB: One 9-pin, USB 3.0-compliant: Internal Dual SD Module (IDSDM) Two optional flash memory card slots with the internal SD module.
R430 Memory Slots Games
| Environmental specifications | |
|---|---|
NOTE: For additional information about environmental measurements for specific system configurations, see dell.com/environmental_datasheets. | |
| Temperature | |
| Storage | –40°C to 65°C (–40°F to 149°F) |
| Continuous operation (for altitude less than 950 m or 3117 ft) | 10°C to 35°C (50°F to 95°F) with no direct sunlight on the equipment. |
| Fresh air | For information on fresh air, see Expanded Operating Temperature section. |
| Maximum temperature gradient (operating and storage) | 20°C/h (36°F/h) |
| Relative humidity | |
| Storage | 5% to 95% RH with 33°C (91°F) maximum dew point. Atmosphere must be non-condensing at all times. |
| Operating | 10% to 80% Relative Humidity with 29°C (84.2°F) maximum dew point. |
| Maximum vibration | |
| Operating | 0.26 G rms at 5 Hz to 350 Hz (all operation orientations). |
| Storage | 1.88 G rms at 10 Hz to 500 Hz for 15 min (all six sides tested). |
| Maximum shock | |
| Operating | Six consecutively executed shock pulses in the positive and negative x, y, and z axes of 40 G for up to 2.3 ms. |
| Storage | Six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 71 G for up to 2 ms. |
| Maximum altitude | |
| Operating | 3048 2000 m (10,000 6560 ft). |
| Storage | 12,000 m (39,370 ft). |
| Operating temperature de-rating | |
| Up to 35 °C (95 °F) | Maximum temperature is reduced by 1°C/300 m (1°F/547 ft) above 950 m (3,117 ft). |
| 35 °C to 40 °C (95 °F to 104 °F) | Maximum temperature is reduced by 1°C/175 m (1°F/319 ft) above 950 m (3,117 ft). |
| 40 °C to 45 °C (104 °F to 113 °F) | Maximum temperature is reduced by 1°C/125 m (1°F/228 ft) above 950 m (3,117 ft). |
| Particulate contamination NOTE: This section defines the limits to help avoid IT equipment damage and/or failure from particulates and gaseous contamination. If it is determined that levels of particulates or gaseous pollution are beyond the limits specified below and are the reason for the damage and/or failures to your equipment, it may be necessary for you to re-mediate the environmental conditions that are causing the damage and/or failures. Re-mediation of environmental conditions will be the responsibility of the customer. | |
| Air filtration NOTE: Applies to data center environments only. Air filtration requirements do not apply to IT equipment designed to be used outside a data center, in environments such as an office or factory floor. | Data center air filtration as defined by ISO Class 8 per ISO 14644-1 with a 95% upper confidence limit. NOTE: Air entering the data center must have MERV11 or MERV13 filtration. |
| Conductive dust NOTE: Applies to data center and non-data center environments. | Air must be free of conductive dust, zinc whiskers, or other conductive particles. |
| Corrosive dust NOTE: Applies to data center and non-data center environments. |
|
| Gaseous contamination | |
NOTE: Maximum corrosive contaminant levels measured at ≤50% relative humidity. | |
| Copper coupon corrosion rate | <300 Å/month per Class G1 as defined by ANSI/ISA71.04-1985. |
| Silver coupon corrosion rate | <200 Å/month as defined by AHSRAE TC9.9. |
R430 Memory Slots App
| Environmental specifications | |
|---|---|
NOTE: For additional information about environmental measurements for specific system configurations, see dell.com/environmental_datasheets. | |
| Temperature | |
| Storage | –40°C to 65°C (–40°F to 149°F) |
| Continuous operation (for altitude less than 950 m or 3117 ft) | 10°C to 35°C (50°F to 95°F) with no direct sunlight on the equipment. |
| Fresh air | For information on fresh air, see Expanded Operating Temperature section. |
| Maximum temperature gradient (operating and storage) | 20°C/h (36°F/h) |
| Relative humidity | |
| Storage | 5% to 95% RH with 33°C (91°F) maximum dew point. Atmosphere must be non-condensing at all times. |
| Operating | 10% to 80% Relative Humidity with 29°C (84.2°F) maximum dew point. |
| Maximum vibration | |
| Operating | 0.26 G rms at 5 Hz to 350 Hz (all operation orientations). |
| Storage | 1.88 G rms at 10 Hz to 500 Hz for 15 min (all six sides tested). |
| Maximum shock | |
| Operating | Six consecutively executed shock pulses in the positive and negative x, y, and z axes of 40 G for up to 2.3 ms. |
| Storage | Six consecutively executed shock pulses in the positive and negative x, y, and z axes (one pulse on each side of the system) of 71 G for up to 2 ms. |
| Maximum altitude | |
| Operating | 3048 2000 m (10,000 6560 ft). |
| Storage | 12,000 m (39,370 ft). |
| Operating temperature de-rating | |
| Up to 35 °C (95 °F) | Maximum temperature is reduced by 1°C/300 m (1°F/547 ft) above 950 m (3,117 ft). |
| 35 °C to 40 °C (95 °F to 104 °F) | Maximum temperature is reduced by 1°C/175 m (1°F/319 ft) above 950 m (3,117 ft). |
| 40 °C to 45 °C (104 °F to 113 °F) | Maximum temperature is reduced by 1°C/125 m (1°F/228 ft) above 950 m (3,117 ft). |
| Particulate contamination NOTE: This section defines the limits to help avoid IT equipment damage and/or failure from particulates and gaseous contamination. If it is determined that levels of particulates or gaseous pollution are beyond the limits specified below and are the reason for the damage and/or failures to your equipment, it may be necessary for you to re-mediate the environmental conditions that are causing the damage and/or failures. Re-mediation of environmental conditions will be the responsibility of the customer. | |
| Air filtration NOTE: Applies to data center environments only. Air filtration requirements do not apply to IT equipment designed to be used outside a data center, in environments such as an office or factory floor. | Data center air filtration as defined by ISO Class 8 per ISO 14644-1 with a 95% upper confidence limit. NOTE: Air entering the data center must have MERV11 or MERV13 filtration. |
| Conductive dust NOTE: Applies to data center and non-data center environments. | Air must be free of conductive dust, zinc whiskers, or other conductive particles. |
| Corrosive dust NOTE: Applies to data center and non-data center environments. |
|
| Gaseous contamination | |
NOTE: Maximum corrosive contaminant levels measured at ≤50% relative humidity. | |
| Copper coupon corrosion rate | <300 Å/month per Class G1 as defined by ANSI/ISA71.04-1985. |
| Silver coupon corrosion rate | <200 Å/month as defined by AHSRAE TC9.9. |